Tel No. (+86) 186-0797-1528

The chute feeder

Usage

Used to beneficiation, coal, chemical engineering and other industries.

Product Presentation

The chute feeder can be fixed on the floor and also can be hoisting onto the discharge outlet of the ore storage bin.

The chute baseboard makes reciprocating motion, with jig frequency of 20-60/min, stroke of 20-200mm. The stroke can be adjusted by actuating device eccentric gear, eccentric distance is half of stroke. Based on experience of some beneficiation plant production, the eccentric distance should not less than 30mm for viscidity ore. The chute width is approx 2-2.5 times of max feed granularity. The largest chute feeder can satisfied to feed for iron ore granularity less than 500mm. The most common specification is 980*1240 chute feeder, which granularity is 350-0mm, suitable for as feeder of 400*600 jaw crusher.

Features

The chute feeder is used to beneficiation, coal, chemical engineering and other industries, put the granular and blocky material from storage bin into those different input device, but not suitable for conveying concentrate fines and other powdery material.

Technological Process

The chute feeder is a device of chute baseboard reciprocated to feed. It can be hoisting under the storage bin discharge outlet, also can be fixed on the floor.

Mainly used as the feeder of jaw crusher etc. which is need to feed equably.

Model Outlet size L×H(mm) Max. feed size (mm) Feeding capacity (t/h) Motor Model Power (kw) Weight (kg)
CG300×300 300×300 50 10--20 Y90L-4 1.5 265
CG400×400 400×400 100 10--30 Y112M-6 2.2 535
CG600×500 600×500 200 10--50 Y112M-4 4 1045
CG700×500 700×500 250 10--60 Y112M-4 4 1100
CG980×1240 980×800 350 36--90 Y160M-6 7.5 1710
Top